86exporter.com Home       Products Catalog      Suppliers Catalog      Log In        Sign up
      About Us
      Profile
      Products
      Contact Us


Shenzhen Hong Ye Jie Technology Co., Ltd

Products >> Silicone Rubber For Tyre Molding

Silicone Rubber For Tyre Molding

Build Your Online Product Catalogs?



Description
Product Name: Silicone Rubber For Tyre Molding
Supply Ability: 8 Ton per Day
Related proudcts silicone rubber, tyre molding silicon, tyre molding silicon,
Specifications 1.Low shrinkage (less than 0.1% ) 2.High tensile and tear streng
Price Term: FOB shenzhen
Port of loading: shenzhen port
Minimum Order 200 kg
Unit Price: 6.98- 7.89USD/kg

Description
HY- E series addition molding silicone is generally named two-components silicone
rubber, Part A and part B. It features an exceptional fluidity and good operability.
The mixing ratio is 1:1 (10:1),mainly be suitable for making molds application.

Typical Applications
HY- E series addition molding silicone could be mainly used for making concrete
stones, wax molds, PU molds, resin molds, gypsum casting, candle molding and
chocolate , candy and any other FDA food product mold making,prototyping etc.
HY-E620 Silicone Rubber is has been used for years to make tire pattern molds .
Characteristics
1.Low shrinkage (less than 0.1% )
2.High tensile and tear strength with high copy times
3.Easy for operation (mixing ratio at 1:1 /10:1)
4.Very good flow and easy for pouring operation
5.Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
Operation instruction of HY-E Series molding silicone:
1. Pls clear the model and tool totally before operation to prevent cure inhibition.
2.Weigh the two part correctly by electronic weight in two separate container .
3. Mixing the two part in 1:1/10:1 and stir part A and part B evenly in 2-3 minutes .
4.And get the mixture for vacuum-pumping for de-air the bubble in around 2-3
minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly
down the side of the mold frame so that less bubbles caused)
5. Enclose the product (the original model) with four plastic plates or wooden plates.
6. Clean your products and brush a layer of release agent(***ergent or soap water) on
your product.
7. Pour the vacuumed mixture into the model frame from the side of the mold frame .

Notice :
As our E-series silicone is platinum cure silicone , which is very easy to cause
cure inhibition , so pls do remember thoroughly clean the model and tool before
operation . Besides , pls avoid the liquid E-series silicone contact or mix with the
following material , otherwise the silicone won

Contact Us
Company: Shenzhen Hong Ye Jie Technology Co., Ltd
Contact: Mr. Hugo Chen
Address: Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang,
Postcode: 518117
Tel: 086 755 89948019
Fax: 086 755 89948030
E-mail:         


Copyright© Shenzhen Hong Ye Jie Technology Co., Ltd All Rights Reserved.
Tel : 086 755 89948019 Fax : 086 755 89948030
Powered by 86exporter.com